在隔熱斷橋鋁型材制造中，穿條機機由機體、工作臺、滑動板、氣動系統、電控盤、傳動滾輪等主要組成部分。那具體操作及使用怎么進行呢？下面由有十多年的機器研發經驗的濟南歌德瑞斯機械設備為您帶來開齒穿條機的相關知識。

In the manufacturing of insulated broken bridge aluminum profiles, the threading machine is mainly composed of the body, workbench, sliding plate, pneumatic system, electric control panel, transmission roller, and other main components. How to carry out the specific operation and use? Below, Jinan Gede Ruisi Mechanical Equipment, with over ten years of experience in machine research and development, will bring you the relevant knowledge of toothed threading machines.

　　開齒穿條機操作要點:

Key points for operating a toothed threading machine:

　　1、操縱者必須熟悉設備的性能，遵守安全操縱規程，防止事故發生。

1. Operators must be familiar with the performance of the equipment, comply with safety operating procedures, and prevent accidents from occurring.

　　2、使用前必須認真檢查設備的性能，確保各部件完好。設備的電源線路必須安全可靠，嚴禁私自亂拉。

2. Before use, the performance of the equipment must be carefully checked to ensure that all components are intact. The power supply line of the equipment must be safe and reliable, and unauthorized pulling is strictly prohibited.

　　3、加工的工件必須夾持牢靠，嚴禁不經夾固就開機切割。切割時操縱者必須偏離砂輪片正面，并戴好防護眼鏡。

3. The processed workpiece must be firmly clamped, and it is strictly prohibited to start cutting without being clamped. During cutting, the operator must deviate from the front of the grinding wheel and wear protective goggles.

　　4、砂輪片調換安裝時應裝夾平穩牢固，防護罩必須安裝正確，裝夾后應開機空運轉檢查，不得有抖動和異常噪聲。

4. When replacing and installing the grinding wheel, it should be clamped steadily and firmly, and the protective cover must be installed correctly. After clamping, it should be turned on and checked by idling, and there should be no shaking or abnormal noise.

　　5、嚴禁在開齒穿條機砂輪平面上，修磨工件的毛刺，防止砂輪片碎裂。嚴禁使用已有殘缺的砂輪片，切割時應防止火星四濺，并闊別易燃物品

5. It is strictly prohibited to polish the burrs on the grinding wheel surface of the toothed threading machine to prevent the grinding wheel from breaking. It is strictly prohibited to use damaged grinding wheels. During cutting, sparks should be avoided and flammable materials should be kept away

　　6、設備出現抖動及其它故障，應立即停機修理，嚴禁帶病作業。加工完畢應封閉電源，并做好設備及四周場地清潔衛生。

6. If the equipment shakes or malfunctions, it should be immediately shut down for repair. It is strictly prohibited to work with defects. After processing, the power supply should be closed and the equipment and surrounding area should be cleaned and hygienic.

　　7、檢查鋸片是否鋒利，是否鎖緊，鋸片必須平整，鋸齒尖銳，不得連續缺齒兩個，不得有裂紋。不能使用鈍了齒的鋸片。用鈍了必須研磨復修后再使用。

7. Check if the saw blade is sharp and locked tightly. The saw blade must be flat, with sharp teeth and no continuous missing teeth or cracks. Do not use saw blades with dull teeth. If it becomes dull, it must be ground and repaired before use.

　　8、檢查鋸片旋轉方向，確保鋸片旋轉方向正確。不得使用變形或者損壞的鋸片。檢查導軌、齒條絲桿上是否有障礙物，并及時清理。

8. Check the rotation direction of the saw blade to ensure that it rotates in the correct direction. Do not use deformed or damaged saw blades. Check if there are any obstacles on the guide rail and rack screw, and clean them in a timely manner.

本文由開齒穿條機友情奉獻.更多有關的知識請點擊:http://www.66pp009.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated to the friendship of the toothed threading machine. For more related knowledge, please click: http://www.66pp009.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned